Repair and temporary dam at Mount Polley Mine near Williams Lake.

Mount Polley design, steep additions led to failure

Glacial layer in dam base not understood, plans to buttress slope put off until weight of water and tailings caused breach

The Mount Polley mine dam failed because of an overlooked glacial material layer in the foundation and a series of steep additions that eventually overcame it, an independent engineering review has concluded.

“Basically the weight of the dam was too much for the weak materials in the foundation to bear,” said U.S. consulting engineer Steven Vick, one of three experts called in to examine the failure that caused the dam to breach and fail in August 2014.

The report concludes that the concrete-like glacial till material in the base of the dam wasn’t understood in enough detail when the dam was designed and built in 1997. Later raising of the dam to hold more water and tailings weakened the base layer and led to the failure.

Vick said the additions to the dam were built at a steeper slope than the original dam, and plans to buttress the area were delayed until it was too late.

Energy and Mines Minister Bill Bennett said the report shows there were no warning signs, and no surface inspections could have detected the problem that was overlooked in the design and original construction.

Two more investigations of the mine failure are pending. Bennett said the Chief Inspector of Mines is likely to release his report by June, and the Conservation Officers’ Service will also report when its investigation is complete.

Bennett said the government is willing to see the Mount Polley mine reopen, but the other investigations must be complete first. The parent company Imperial Metals has applied to use an existing pit to store tailings and resume operations without using the original tailings pond again.

 

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

MLAs say Parksville will better prepared for flooding emergencies

RDN receives $150K in funding for Englishman River Flood Hazard Mapping project

Campaign aims to raise $50K for young family of deceased Vancouver Island skydiver

James Smith, 34, died July 5 following incident in Nanoose Bay

Parksville man, 95, gets lifetime achievement award for civil rights work

Bill Duncan worked with Martin Luther King Jr. in Chicago

B.C. sees 25 new COVID-19 cases, community exposure tracked

One death, outbreaks remain in two long-term care facilities

Comox Valley RCMP looking for missing woman

Ami Guthrie was last seen in Courtenay in early July

VIDEO: Vancouver Island cat missing 18 months reunited with family

Blue the cat found at Victoria museum 17 kilometres from home

VIDEO: Alberta man rescues baby eagle believed to be drowning in East Kootenay lake

Brett Bacon was boating on a lake in Windermere when he spotted the baby eagle struggling in the water

Vancouver Island business ad unintentionally features OK gesture linked to white supremacy

Innocuous ‘OK’ gesture in cleaning franchise advertisement gets flak on social media for ‘supposedly’ promoting white supremacy

Minivan driver’s speed a factor in fatal 2018 Malahat crash

Driver was travelling at 110 km/h in a construction zone

Conservationists raise concerns over state of care for grizzly cubs transferred to B.C. zoo

‘Let them be assessed now before their fate is sealed,’ urges B.C. conservationist Barb Murray

B.C.’s COVID-19 job recovery led by tourism, finance minister says

Okanagan a bright spot for in-province visitor economy

Lower Mainland YouTubers claim to be Kelowna display toilet ‘poopers’

RCMP can not speak to legitimacy of video, will be investigating

Most Read