Parksville MakerSpace director John Eyre, right, discusses a part he created on a 3D printer for model railroad enthusiast and Makerspace member Allan Clark, rear, at the Makerspace facility in the basement of the McMillan Arts Centre. — J.R. Rardon photo

Parksville MakerSpace members ride the rails

New room added for model train enthusiasts; workshop set for Jan. 21

Steam locomotives from the 19th century and 3D printers from the 21st are forming an unlikely partnership. And it’s happening in downtown Parksville.

Parksville’s MakerSpace will unveil its new model railroad room Sunday, Jan. 21, with a workshop and demo for model railroad enthusiasts and those interested in learning more about the hobby.

The session will start at 1 p.m. in the Parksville MakerSpace, located in the basement of the McMillan Arts Centre building at 133 McMillan Ave.

“We’re trying to integrate the cyberworld with what I call the crafty bunch,” said Allan Clark, a longtime model railroader who teamed with MakerSpace member Jim Bennett to conceive the model railroad room.

He coaxed local MakerSpace founder and director John Eyre to consider space for model rail enthusiasts as a logical base for another group of tinkerers and crafters, who may also benefit from the expertise of those who work in other disciplines.

“I’m happy to have the model railroading group in here, not because I have a history or interest myself, but because I can see a whole range of things you can do with a model railway that would fit everybody’s interest,” said Eyre. “There’s woodworking, model house-building and scenery, painting backgrounds and setting up tracks. And you can use all the electronic control systems we have here to control the trains. The computer guys or control systems and electronics people can get in there, as well.”

Eyre put that to the test himself when, at the request of Clark, he modelled a sand dome for Clark’s refurbished steam locomotive and then printed it using one of the three, 3D printers at MakerSpace.

“I could do that on a lathe,” Clark admitted. “But it was like a nightmare. It was an exercise, too. I wanted to see if John could actually do it, and he took that as a challenge.”

Sunday’s workshop will include classes on model railroading and a demonstration on how to build scenery — including a “mountain” with a tunnel that Clark has already started using cardboard lath strips, a wood frame, several layers of plaster and some paint.

Bennett said the new room could be a space for those who would like to try model railroading but who don’t have the space in their own homes or garages. It could also benefit those who have previously operated model railroads but who have downsized and can no longer keep them at home.

“This layout we’ve got here is going to be an operating railroad,” said Bennett, adding there will be a portable module that can be removed and taken to link with other HO-scale railroads, including at gatherings like the Vancouver Model Train Show. “We’ll have a warehouse here, and an operation to get a rail car here and take it to the warehouse for loading, then pick up another car.

“Rather than just watching the train go around in a circle, you’re actually operating it.”

Eyre described MakerSpace as a place for “STEM” practitioners — those oriented toward science, technology, electronics and math. Parksville MakerSpace includes computers, printers and other peripherals, a woodshop, a craft room with large tables, training and tutoring space, the new model railroad room and even a break room with pool and ping-pong tables. All Eyre needs is members to populate it, he said.

“When John told us his vision for the MakerSpace and asked us how we could help him make it grow, I knew, via my neighbour Allan, there were quite a number of model train guys,” said Bennett. “With model railroading you’re making something, but also in my early discussions I saw it was a way to help grow MakerSpace.”

For more information, call Bennett at 250-594-2893 or email theoceansidemakerspace@gmail.com.

Send story tips to:

editor@pqbnews.com

Just Posted

Qualicum Beach society goes to bat for insect eaters

Two bat houses built to monitor population in Heritage Forest

Parksville reopens portion of wetland

City undertakes review, remediation of liability concerns

Is Steve Nash Vancouver Island’s best athlete of all-time?

As Captain Canada gets ready to enter basketball’s Hall of Fame it’s time to debate his legacy

Who is Vancouver Island’s greatest athlete ever?

We want to know, you get to choose in a 64-athlete tournament bracket

Vehicle knocks out Parksville power pole

Traffic single lane heading southbound

VIDEO: Canadian Forces help flood-ravaged Grand Forks residents heal

Sgt. Bradley Lowes says the military is used to dealing with traumatic times

Friends and family playing huge role in search for Vancouver Island man

Volunteers from the public join forces with SAR crews

Chilliwack Chiefs make history with first RBC Cup win

In front of a huge and noisy crowd, the Chiefs claimed their first-ever national junior A title.

Central Vancouver Island man dies in single-vehicle collision

Pickup truck with three occupants went off the road near Port Alberni

UPDATED: Majority of flood evacuees in Kootenay-Boundary allowed to return home

Officials hope to have all 3,000 people back in their homes by Monday night

B.C. Lions bring back 6-time all-star offensive lineman Jovan Olafioye

He was acquired by the Montreal Alouettes last year.

Whitecaps rally for 2-2 draw with FC Dallas

Vancouver climbed out of a two-nil hole to tie FC Dallas 2-2

B.C. VIEWS: Making sense of climate policy

Flood and fire predictions have poor track record so far

Chilliwack Chiefs moving on to RBC Cup final after thrilling win over Ottawa

Kaden Pickering scored the winning goal in the 3rd period as Chilliwack won their semi-final 3-2.

Most Read